Tie Dye Chemistry
Objective:use the process of dying fabrics to illustrate
chemical reactions, equilibrium, chemical bonding,
and P H.
Prelab questions:
1)where did the art of dying fibers originate?
-The art of dying fibers originated from India
2)originally, what type of substances were use to dye?
-it came from parts of plants such as the bark, berries,
flowers, leaves, and roots.
3)what are the fibers of the shit made out of?
-the fibers of the shirt are made out of cotton.
4)what chemical interaction is occurring when fibers are
dye?
-they are forming covalent bonds
History of dyeing fabrics:
The art of dyeing clothing fibers originated in India or China no later than 2500 B.C. Most natural dyes came from parts of plants such as the bark, berries, flowers, leaves, and roots.
In 1856, William Henry Perkin began the synthetic organic chemical industry by accidentally discovering the purple dye, mauveine,
when he tried to produce quinine from aniline.
About 100 years after Perkin’s first discovery, fiber-reactive dyes capable of forming covalent linkages with the fiber were discovered.
Chemistry of Dyeing Fabrics:
Some dyes only stain the cloth, and wash out a little each time the cloth is laundered. High Quality dyes (fiber-active dyes) actually chemically (covalent) bond to the molecules of the fabric and can never be washed out. The dye molecules carry a “chromophore”, which absorb varying spectrums of light, allowing only certain spectrums to reflect.
Cotton is made of long strands of cellulose molecules, all twisted together. Cotton is ideal for dying because the fibers are naturally hollow, and the dye molecules will form bonds on both the inside and outside of the fiber. If you put molecules of dye and cotton together, very little will happen until the atoms on the surfaces of the
molecules are prepared for bonding.
This can be done by either increasing the temperature or the pH of the fiber and dye. In this lab, we will do the latter, increasing the pH by soaking the fabric in calcium carbonate, which causes the releases a H atom from the cellulose molecule. The removal of the H atom leaves the cellulose molecule with some atoms that do not have stable octets. As a result, the dye can bond to the cellulose molecule at the site of the removed H atom.
After the dye is applied, it is allowed to react in a desirable host environment for up to 24 hours. After this time, the bonding sites on the cellulose should be saturated with dye molecules. Excess dye molecules that have not bonded permanently are washed away using warm water rinse and a dye-carrying detergent.
Examples of tie dye shirts
How To Do A Tie Dye Shirt
procedure:
Step 1: With a permanent marker, write your name on the cloth you will be tie dying. There will be many other shirts in the lab during this activity; be sure yours is marked to avoid losing it.
Step 2: Soak your cloth in the hot water for about 5 minutes. Be sure you put it in the tub marked for your period.
Step 3: Put on a pair of gloves, remove your cloth from the soaking tub and wring out. Using the below diagrams, tie you cloth in one (or a combination of) the methods shown using string or rubber bands.
Step 4: Dye application. Apply the dye using the applicator bottles. Be aware that mixing will occur where the dyes come in contact with each other. Using complimentary colors (purple and yellows, blues and orange, or red and green) near each other usually produces a brownish black color. Also, the more dye you put on a given spot, the less white will remain on the final product.
Step 5: Place your dye-soaked item in a grocery or other plastic bag marked clearly with your name. No pooling of liquid should appear in the bag.
Step 6: After the cloth has soaked for at least 24 hours, open the bag, remove the item, and rinse it several times with warm water, before removing strings or rubber bands. Once it is rinsing clean, remove the ties and rinse several times again until it is rinsing clean. At this point, you can hang it to dry or place it in another bag to take home and wash.
The first time you wash it, place it alone in the washing machine with just a small squirt of dishwashing liquid like Dawn or Joy. Do not use laundry detergent.
data:
1.) Write down a synopsis of what occurred before the dyeing of the shirt.
-Before we dye the shirt we had to live it in cool water for 5
minutes and then soaked the shirt and then put the rober bands
and start dying the shirts
2.) Explain the process used to dye your shirt - pattern, tying method.
-I choose to do the donuts pattern so fist i had to grab the
shirt and tie it up with two rober bands in the same spot
and keep doing the same thing in different spots and then
grab the dye and put one color at the top and other color
at the bottom and then grab another color for the hole
shirt.The shirt looked like this=>
3.) After the shirt sat for 24 hours, describe the pattern of the shirt - picture, if possible.
Post Lab Questions:
1.) If you dyed a rainbow spiral on a shirt and then soaked it in a black dye bath, the result would be a black shirt with a rainbow spiral pattern. Why doesn’t the entire shirt dye black?
-Because the shirt had already bonded with the rainbow dye.
2. What is the purpose of soaking the shirts in the hot water for 5 minutes?
-So that the cotton fibers can react better with the dye.
3. Why is 100% cotton the best type of cloth to use with fiber reactive dyes?
-because the dye will bond better therefore the dye can't bleed
Here some example of tie dye shirts and different patterns:
Choose a design
